TO BE PERFORMED BY A QUALIFIED TECHNICIAN ONLY!

i) Phone Legalett: 1-800-299-7567 - extension # 225.

- Hours of Operation: Monday - Friday / 8:00 am - 4:00 pm  (Eastern Time Zone)

ii) Please have ready: Name, Street Address, Insert Model #.

- Legalett will send the Shipping Box to you with a Pre-Paid Return Courier Label,
  Customer will be invoiced for shipping cost unless repair is covered under warranty .

Disconnect and remove the heating insert from the sheet metal distribution box.

If insert is a water model, blow out the water coils, as per the following procedure, prior to placing insert into shipping box.

i) Remove 1 valve actuator at a time to ensure that valve is in OPEN position, as per photo.
ii) With compressed air, blow out water from corresponding water coil.
iii) Re-install actuator.
iv) Repeat this procedure with each of the remaining water coils.

Package insert appropriately using the shipping box provided, as illustrated in these photos.

Apply Pre-Paid Return Courier Label provided and Send to Legalett.

During winter months you may desire to install a construction heater or temporary electric heater while insert is being serviced. Contact your Legalett Installer, Service Representative or Legalett for details regarding the rental of a Legalett construction heater or rental of a Legalett temporary electric heater.

NOTE: Wiring may be required for a 240V - 30 amp electrical supply.